Car Bumper, Hood and Fender Dent Repair in Riviera Beach, FL
Bumper dent repair in Palm Beach County, FL, plus hood and fender dents, on plastic bumpers and metal panels. Book a time, and the free estimate happens in person at our Riviera Beach shop.
What PDR can fix
Car Fender Dent Repair Without Repainting
Car fender dent repair without repainting starts with Juan Bacchetta working the dent out from behind, so the factory finish stays. Sharp creases take more time and skill, and any cracked paint is checked at the free estimate, where Juan explains the options.
Fender dents usually come from tight parking, a door opened into the fender, or a cart rolling into the side of the car. Most are shallow, which suits paintless repair. Rear fenders, or quarter panels, are covered further down this page.
Dents on the folded edge or at the wheel opening are harder for tools to reach, so Juan checks the access route at the estimate. Because nothing is repainted or replaced, PDR usually avoids the driver-assistance (ADAS) sensor recalibration that a repaint or panel replacement can trigger. A dent at a sensor or its mount can still mean recalibration.
Hood Dent Repair on Large, Flat Panels
Hood dent repair is done without repainting, and a smooth dish moves back more easily than a fold. A hood is a long, flat mirror, so Juan reads it under an LED line board until the reflection runs straight.
In South Florida, hood dents often come from falling branches, coconuts or items dropped from a parking deck above. Hail adds rows of small dents across the whole hood, which is a job for hail damage repair. Aluminum hoods are common on newer cars and trucks, and they are read under the same light.
Ribs and bracing sit under the hood, so a dent over a brace may need glue tabs from the top. Aluminum hoods can be repaired but take more skill and time; the aluminum hood and fender dent repair page covers them.
Small Dent Repair for Dings, Dimples and Shallow Creases
Small dent repair covers shallow dings, dimples and soft creases, and PDR does it without repainting.
A small dent is worth fixing early. Paint that cracks around a dent can let moisture reach bare metal, and salty coastal air speeds up rust.
Small dent repair also helps resale, because a buyer or appraiser sees a smooth panel that was never repainted.
Depth, location and creasing matter as much as size. Dings on door panels have their own page, door ding repair, and the method is covered under paintless dent repair.
- Dings: small, shallow marks from a door edge, a cart or a stray ball.
- Dimples: round, shallow dents with smooth edges.
- Shallow creases: a soft fold in the metal, not a sharp line.
- Pressure dents: a shallow push from someone leaning or sitting on the panel.
Can PDR Fix Your Dent? What the Technician Checks
Minor dent repair by PDR depends on the shape of the dent, the metal and how a tool can reach it, and Juan checks each one at the free estimate.
Dents also differ in shape. A round dish is the most common and usually the simplest. A crease follows a line, a sharp dent has a pointed center, and a body-line dent sits on a styling edge.
Painting, filler and panel replacement are not part of what PDR 360 does. For cracked paint or scratches, Juan looks at the car at the estimate and explains the options; see cracked paint and bumper body repair.
- Finish: Juan checks the paint, and cracked, chipped or peeling paint does not rule the car out.
- Metal: round, deep or body-line dents can be eased back when a tool can reach them; a sharp fold or stretched metal takes more time and skill.
- Access: a rod or glue tab must reach the dent, and folded-back edges often block it.
- Bumpers: plastic bumper covers are repaired at the shop too.
- Shape: round dents move back more easily than creases or sharp dents.
Plastic Bumper Dent Repair at the Riviera Beach Shop
PDR 360 works on plastic bumper covers as well as metal panels, and dented bumpers of both kinds come through the shop. If a cover is scuffed or cracked, Juan looks it over at the free estimate and talks through what can be done. The cracked paint and bumper body repair page covers scratches and paint damage.
For bumper dent repair in Palm Beach County, FL, PDR 360 works on the bumper cover and the metal beside and above it. That means fender tips, quarter panels, the hood and the trunk lid as well.
Cost factors
What Affects Bumper Dent Repair Cost
Bumper dent repair cost depends on the dent and the panel, and Juan sets it at your free estimate.
No chart covers every dent, so the estimate looks at your panel, your paint and your access route.
Photos can give Juan a first look, but the estimate itself happens at the shop. It weighs these factors:
- Size and depth of the dent: deeper dents stretch the metal further.
- How many dents are on the panel or vehicle.
- Location: open area, body line or edge, since lines and edges are stiffer.
- Panel material: aluminum takes more skill and time than steel.
- Whether rods or glue tabs can reach the dent, which bracing and double panels can limit.
- Paint condition: intact, or cracked, chipped or peeling.
- Previous repairs: a panel that was filled before takes a closer look.
How it works
Bumper Dent Repair in Palm Beach County, Step by Step
A repair at PDR 360 takes five steps. Every dent that qualifies for PDR, on one panel or several, follows the same order.
Hood, fender and quarter panel repairs follow the same steps; only the access route changes.
- Request an estimate
Request a free estimate and add a few photos if you can. They give Juan a first look at paint, depth and location, and the shop follows up to book your visit.
- Appointment
Bring the vehicle to the shop at 8049 Monetary Drive, Suite C-1, Riviera Beach, FL 33404. Shop hours are Monday through Friday, 9:00 am to 12:00 pm and 1:00 pm to 5:00 pm. By appointment only.
- Inspection
An LED line board shows the dent’s contours while Juan checks the paint and the access. You get the free estimate and the timeframe at this step.
- Repair
Juan works the metal out with rods, or with glue tabs where nothing can reach behind the panel. Nothing is sanded, filled or repainted.
- Final check
Juan checks the panel under the line board again before returning the vehicle.
Roof, Trunk and Quarter Panel Dent Repair
Roof dent repair is possible without repainting, as it is on the trunk lid and quarter panels. The checks are the same: the paint, the metal and a tool path to the dent.
Roof dents often sit near the bows that brace the roof from below, and a sunroof frame limits access further. A trunk lid has an inner frame with openings, which often gives rods a way in. Quarter panel dents behind the rear wheel often come from shopping carts and tight garage entries.
Hail damage concentrates on the roof, hood and trunk lid, and roof bracing can mean glue tabs from above; see hail damage repair. On most cars, quarter panels are welded into the body, so tool access near their edges often decides whether PDR is possible.
Finished panels are in the bumper, hood and fender repair photos, and customer comments are in the Google reviews. The full list of repairs is under all dent repair services.
Related repairs.
How the method works and what it fixes.
Parking‑lot dings and cart hits on door panels.
Bumper, Scratch and Auto Body Repair
Scratches, cracked paint and bumper covers: what Juan checks.
Motorcycle Gas Tank Dent Repair
Tank and fender dents on motorcycles.
Drivers from Palm Beach and Broward counties bring dents to the Riviera Beach shop, by appointment.
How much does it cost to repair a dented bumper?
The cost to repair a dented bumper depends on the damage, so PDR 360 sets it at the estimate. Size, depth, location, body lines and edges, steel versus aluminum, the number of dents, access and paint condition all change the work. Plastic bumper covers are repaired at the shop too. The cost on your car comes from a free estimate at the shop. Photos sent through the form give Juan a first look before you visit.
Can a dent in a plastic bumper be repaired without painting?
PDR 360 repairs dented plastic bumper covers at the shop, as well as the metal panels around the bumper. Whether a cover can be done without painting depends on the dent and the surface, so Juan checks it at the free estimate and explains the options. See cracked paint and bumper body repair.
How do you repair a dent in a car?
Paintless dent repair works the metal back into shape and keeps the factory paint. Juan studies the dent's reflection on an LED line board, then uses rods from behind, or glue tabs when there is no rear access. Juan checks the paint, the shape of the metal and the tool access first. See paintless dent repair. Small dent repair and minor dent repair follow the same method.
Do bumper dent repair kits work?
Bumper dent repair kits sometimes work on shallow dents, but results vary. A hard pull can leave a raised high spot or crack the paint, which makes the repair harder. If you tried a kit, tell Juan. See which small dents PDR can fix. Suction cups and glue pullers do not show the dent's true shape the way a line board does, so it is easy to pull too far.
How do I repair a dent in a car fender?
A technician pushes a fender dent out from behind or pulls it with glue tabs. Dents on a folded edge or the wheel opening are harder to reach, and any cracked paint is checked at the free estimate. Photos sent with the free estimate form give Juan a first look at which case you have. Front fenders are usually bolted on, which can make the back of the panel easier to reach.
Book your free estimate at the Riviera Beach shop. Call 561-701-3318 to set your appointment. Before you drive over, get directions to the shop.
- 5.0 from 335 Google reviews
- Nearly 30 years of paintless dent repair
- Free estimate at the shop
- Every repair done in house at our shop